The black screen can be changed: This is the most common reason for getting ERROR_GRAPHICS_INCONSISTENT_DEVICE_LINK_STATE The adapter link was found to be in an inconsistent state. Not all adapters are in an expected PNP or power state. Error. Here are the steps to repair your black screen:, so, you can have a try.
1. You need to know the version of your Windows Vista. To find out what version of Vista you're running, click the Start button, type winver into the Search box, and press Enter.
When the About Windows box appears, the words Service Pack 1 or Service Pack 2 should be listed on the box's second line.
2. If no service pack is listed, then click Start menu, All Programs, and click Windows Update. Download all the updates marked "Important" until Microsoft slips you a copy of Service Pack 1.
3. Visit Microsoft's Windows 7 Upgrade Advisor Web site and click the Download the Windows 7 Upgrade Advisor button.
In Microsoft's traditional sleight of hand, your click fetches a more complicated Windows 7 Upgrade Advisor page.
4. On the second Windows 7 Upgrade Advisor page, click the Download button.
When asked whether you want to Run or Save the file, Choose Save. This step saves the file on your Desktop or in your Downloads folder.
5. When the download completes, install the program by double-clicking the downloaded program's name, Windows7UpgradeAdvisorSetup.
Click through the approval screen, if you see one.
6. Click I Accept the License Terms, and click the Install button.
When the program finishes installing, click the Close button.
7. Launch the program by clicking the Start button and choosing Windows 7 Upgrade Advisor.
If not on the Start menu's first page, it's in the All Programs area. If asked, click Yes to allow the program to make changes to your computer.
8. When the Windows 7 Upgrade Advisor program appears, plug all the equipment you want to use with Windows 7 into your computer's USB or FireWire ports, turn on everything plugged into your computer, and then click the Start Check button.
The program begins examining your computer, its software, and all the parts you've plugged into your computer. After a bit of brow furrowing, the program displays its findings.
9. Read Windows Advisor's results, which explain which parts need updated drivers or must be replaced.
You can print the report and take it with you to the store while you shop for updated parts and software.
10. Insert the Windows 7 DVD into your DVD drive and click Run Setup, if necessary.
You may also need to click one of Vista's permission screens before Windows 7 begins examining your computer.
11. When the installation program finally comes up for air, click Install Now.
Windows 7 begins installing temporary files.
12. Choose Go Online to Get the Latest Updates for Installation (Recommended).
This step tells Windows 7 to visit Microsoft's Web site and download the latest updates --- drivers, patches, and assorted fixes for your particular computer --- that help make your installation run as smoothly as possible. (Your computer must remain connected to the Internet for the downloads, of course.)
13. Scour Microsoft's 44-page License Agreement, select the I Accept the License Terms check box, and click Next.
Okay, you don't actually have to scour it. Skimming works, too.
14. Choose Upgrade, read the consequences, and click Next.
Choosing Upgrade preserves your Windows Vista computer's old files, settings, and programs.
15. Read the Compatibility Report, if offered, and then click Next.
The upgrade, a process that could take several hours, begins.
16. In the Type Your Windows Product Key dialog box, type your product key and click Next.
The product key usually lives on a little sticker affixed to the CD's packaging.
17. Choose Use Recommended Settings.
This selection allows Windows to visit the Internet to update itself with security patches, warn you of suspicious Web sites, check for troubleshooting information, and send technical information to Microsoft to fine-tune Windows' performance.
18. Confirm the time and date settings, and then click Next.
Windows 7 usually guesses these correctly.
19. If you're connected to a network, choose your computer's location.
Windows 7 gives you options: Home, Work, or Public. After rummaging around inside your computer for a few more minutes, Windows 7 appears on the screen, leaving you at the logon screen.
20. Log on and run Windows Update.
This step downloads any security patches and updated drivers issued by Microsoft.
Network adapter is also named Network Interface Card, it is an expansion card which used to enable your computer to access to network. You can use network adapter to connect both wired network and WiFi.
Check NETWORK ADAPTOR connection
1.Press Win key, the Start Menu will show up, right click on computer, and choose Manage.
2.On the new appeared computer management window, clicking Device manager on the left bar, and then all the devices on your computer will be listed on the right side. Locate and double-click on Network adapters, you can see the network adaptor on your computer now.
Download NETWORK ADAPTOR driver
1.Prepare another computer which can connect to internet.
2.Find the driver download page on the official website of your computer brand and model.
3.On the download page, locate the right download link of your computer, if your computer is 32-bit then choose 32-bit link, or else choose 64-bit link, click to download.
4.Copy downloaded installation package to the computer you want to install, un-zip it, open unzipped folder, double click on setup.exe, install process will start.
5.Follow the common installation progress: accept the License Agreement and click Next to finish the installation.
6.Restart your computer, run Device manager to check whether the driver has been installed.
Update NETWORK ADAPTOR driver
button, type device in the search box, right click on Device Manager in the searching result and choose Open.
2.The Device manager window will appear, locate and double click on Network Adapters, you will find the adapter below of your pc, right click on it and select
MODIFY NETWORK ADAPTOR SETTINGS
1.Click Start button on the left bottom corner of taskbar, click Control Panel.
2.On new appeared All control panel window, locate and click on Device Manger.
3.Device Manager window will open, find and double click on Network Adapters category and find your adapter, right click on it and choose Properties.
4.Navigate to Advanced tab, change settings according to your requirement.